Products

Double-Acting, Hydraulic Return

30-140 tons capacity

1.5-10.13" stroke（38-258mm)

Central Hole Diameter 1.13-3.13”（33.3-79.2 mm）

Max. Pressure 10000 psi (700bar)

We could make OEM designed hydraulic cylinders with your demand.

● Air supply:6bar compressed air, max consumption is 600L/min

● Preset torque，output and repeat accuracy:±5% and ±3%

● Powerful and low noise, less than 80Dba under load

● Free connection of power handle and gear box, could be rotated 360°

● With manual 2-speed gearbox, high/low speed can be shifted freely

● Reverse pressure-bias motor provide the higher torque when removing or loosening bolts

● Supply scope: Air register, hose, quick coupling(air inlet connector of air register is excluded)

● compact structure, strong mobility, quick connection with tools

● good engine cooling conditions, switch automatically, high efficiency

● higher oil flow and bypass pressure

● patented balanced rotating pump components to reduce vibration

● replaceable piston check valves that increase service life of pump components

● Two-speed operation reduces cycle time for improved productivity

● Full-sight oil level glass on all reservoirs allow quick and easy oil level monitoring

● Sturdy wheeled cart allows transport over uneven terrain and features collapsible handles

● Dual forced-air heat exchangers stabilizes hydraulic oil temperature

● Roll cage for easy portability, protects pump

● Light weight,all-directional operation on 7, 15 and 35 tons Internal relief valve to prevent overloading

● All-directional operation

● Internal relief valve to prevent overloading

● Machined flat front and bottom surfaces permit flush alignment in tight corners

● All models include pumping handle

● Chrome plated plungers

● OEM and customization acceptable.

● Air supply: 6bar compressed air, max consumption is 600L/min

● Preset torque,output and repeat accuracy:±5% and ±3%

● Powerful and low noise, less than 80Dba under load

● More suitable for limited working space compared to the straight type

● With manual 2-speed gearbox,high/low speed can be shifted freely

● Equipped with brake system to protect the operator

● Supply scope: Air register, hose, quick coupling (air inlet connector of air register is excluded)

2.5-60 tons capacity

127-152mm stroke

Max. Pressure 10000 psi (700bar)

OEM and customization acceptable.

Prompt Delivery. (Within 20 days against deposit)

Easy installation.

Cost-efficient transport solutions.

Single speed pneumatic torque wrench

● Air flow requirements: PSW-06/10/15, 6bar, 600L/min

● Air flow requirements: PSW-21~PSW-100, 7bar, 800L/min

● Preset torque, output & repeat accuracy: ±5% & ±3%

● Powerful and low noise, less than 80Dba

● Free connection of power handle and gear box, could be rotated 360°

● With single speed gearbox, light weight and small size, easily operated

● Suitable for continuous working with no-impact

● Supply with air register, hose, quick coupling

Single acting cylinder return by load.

Working pressure 70Mpa for small space

With the lowest lifting height, apply to adjust in small gap.

OEM and customization acceptable.

Prompt Delivery. (Within 20 days against deposit)

Easy installation.

Cost-efficient transport solutions.

● Preset torque, stop working automatically

● Air supply:7bar compressed air, max consumption is 600L/min

● Adjust the torque via F.R.L unit, accuracy:±5%

● Powerful and low noise, less than 80Dba under load

● Free connection of power handle and gear box, could be rotated 360°

● With manual 2-speed gearbox, high/low speed can be shifted freely

● Aluminum alloy metal shell air motor & handle, more durability

● Intense planetary system design, better torque-weight ratio

● Excellent contentious working capacity

● Supply with F.R.L unit, air hose and connector.

Flat design for use in confined areas where standard cylinders will not fit.

Rising and retracting height can do trimming precisely and its accuracy is up to 0.01 mm.

Made in high strength alloy steel to extend strength and life.

Integral screw-rod designed hydraulic configuration without extra oil pumps and hoses.

● Air supply:7bar compressed air, max consumption is 600L/min

● Preset torque,output and repeat accuracy:±5% and ±3%

● Powerful and low noise, less than 80Dba under load

● More suitable for limited working space compared to the straight type

● With manual 2-speed gearbox,high/low speed can be shifted freely

● Aluminum alloy metal shell air motor & handle, more durability

● Supply with F.R.L unit, hose and connector.

Lihium battery rechargeable torque wrench

● Preset torque and automatic shutoff when reaching the set torque

● High output and repeat accuracy:±5% and ±3%

● With manual 2-speed gearbox, high/low speed can be shifted freely

● 28V 3Ah LITHIUM-ION battery, powerful and durable, charges just in 1 hour or less

● Suitable for removing or assembly the large nuts and bolts but no power supply

● Free connection of power handle and drive unit, equipped with brake system

● Supply scope: 2 pieces of Lithium battery and 1 piece of quick charger

● 220V 50Hz AC, without external pipeline, convenient

● Continuous rotation, no impact, stop automatically, higher efficiency

● Intelligent torque control system, with the functions of fault self-checking and power of memory, accuracy ± 5%

● Two working models, setting torque directly or according to the system recommend

● Human-machine interface, LCD display,

● Double overload protection, effectively protect transmission parts

● High/low speed switching, improve work efficiency

● High efficiency compared with hydraulic torque wrench

● High intense transparent plastic shell, protect the LCD panel / button effectively.

Single speed electric wrench

● Small size、light weight、more portable

● Input:220-240V AC,50/60Hz

● Preset torque and automatic shutoff when reaching the set torque

● High output and repeat accuracy:±5% and ±3%

● Digital torque control system with LCD display

● Free connection of power handle and drive unit

● Portable and durable design, low noise, with overload protection

● With long-life and automatic cut-off carbon brushes

● Double insulation, more safe

● Industrial design, continuous use ability

● High intense transparent plastic shell, protect the LCD panel / button effectively.

● Compared with direct handle wrench, bending helve wrench more suitable restricted space, precision of ± 5%

● Equipped with brake system, greatly enhance the convenience and security

● 220V 50Hz AC, without external pipeline, convenient

● Intelligent torque control system, with the functions of fault self-checking and power of memory, accuracy ± 5%

● Precision planets structure, high torque/weight ratio, low noise, durable,no leakage, convenient maintenance

● High/low speed switching, improve work efficiency

● Strong reaction arm, Can be 360 degrees adjustment

● Ergonomic hand grips, buffer rubber reduced by 50% vibration, free rotation.

● High intense transparent plastic protection shell.