M Series Gate Valve Grinder Machine
Specification table
pipe beveling machine |
|||||||
Model |
MZ-150 |
M-300 |
M-300C |
M-600 |
MZ-600 |
MZ-900 |
MZ-1200 |
Grinding diameter range |
Φ 60mm- Φ195mm |
Φ 95~ Φ335mm |
Φ 118-430mm |
Φ 225-630mm |
/ |
φ 430- φ960mm |
Φ 530~1330mm |
Suitable valve range |
38mm |
DN80-300 |
DN100-400mm |
/ |
DN200-600mm |
DN400-900mm |
/ |
Rated voltage |
AC220V |
220V |
220V |
220V |
220V |
220V |
220V |
Motor power |
1300W (German Metabo motor) |
1300 W |
1300 W |
1300 W |
1,300 W |
1150 W |
1150W (Bosch) |
Min. distance of valve seats |
/ |
55mm |
60mm |
70mm |
135mm |
160mm |
180mm |
Maximum grinding depth |
350mm |
650mm |
850mm |
900mm |
900mm |
1500 mm |
2000 mm |
Detailed description
The product is a combined structure, which is easy to disassemble and easy to install, easy operation.
The fixed grinding plate is made of high-strength aluminum alloy. This kind of material has high strength, light weight, and is not easy to deform.
Standard configuration of German Metabo motor, bearings for all international famous brands.
Grinding consumables for sand cloth (paper), low cost, convenient replacement.
Fast grinding speed, good quality. The grinding efficiency is 10-30 times that of manual grinding.
Products aluminum plastic box packaging, small volume, light weight, easy to carry.
Operation
1. Turn on the 220V single-phase AC power supply. The power socket should match the power plug of the motor belt.
2. Familiar with the use of Gate Valve Lapping Machine. The operating instructions for the motor should be read carefully. A brief description is as follows: The speed of the Gate Valve Lapping Machine is controlled by changing the switch pressure. The Gate Valve Lapping Machine revs low when the switch is flicked and increases as the pressure increases.
3. The forward and reverse can be changed by the forward and reverse switch. In addition, the motor speed can also be adjusted through the rotary switch. The rotary switch is in the neutral position when it is perpendicular to the motor shaft. The switch is equipped with a flywheel. When the small wheel rotates clockwise in the direction of the flywheel arrow, the speed increases. When you turn the speed control wheel counterclockwise, the speed will decrease.
4. When using the Gate Valve Lapping Machine, generally adjust the speed control wheel to the lowest point, then turn on the motor, and then press the control button (ie the lock button, the black button behind the motor handle), the Gate Valve Lapping Machine is in the state of autorotation , and then the speed is very small.
5. Wheels adjust the speed to the desired desired speed. When shutting down, adjust the speed to the low point first, then press the switch, the locking button can be automatically released, and the switch can be released. machine.
6. Before grinding, be sure to check whether there are high points on the damaged surface of the valve surface. If there is a high point, it should be trimmed first to avoid impacting the grinding disc or changing the angle of the surface to be polished.
7. After use, clean the grinding disc or the dirt on the grinding disc. Use scissors to cut the double-sided tape sandpaper (cloth) according to the diameter of the sandpaper, and stick it on the cleaned grinding seat (disc).
8. If the temperature of the repaired valve is high or there is water, a random diamond grinding disc can be used to fix the grinding disc on the grinding disc for grinding. Water or kerosene should be appropriately added during the grinding process to facilitate grinding and rinsing.
9. Be sure to unplug the motor after use to avoid accidentally bumping the motor switch. Abrasive discs can injure or damage the machine. IMPORTANT: Unplug the motor power plug after shutdown.
10. Apply a small amount of butter to the gears when using.
description2