Products

● Made of high strength Cr Mo alloy steel.

● Pass standard heat treatment process, making the socket safe,reliable and durable.

● WKLC series sockets can also be used for WHCW series.

● Non-standard sockets can be customized

● Reasonable structure and design, beautiful, easy to carry.

● Built-in safety valve for overload protection.

● Large capacity oil tank, applicable to different models of cylinders and tools.

● Al-Ti alloy pump body, light weight, high strength, anti-corrosion, shock resistance.

● Max working pressure 280MPa.

● Built-in precise high/low pressure switching valve, stable and reliable.

● Reduced handle effort and ergonomic grip for less operator fatigue

● Vent free reservoir eliminates spills

● Quick grip handle allows for easy transport

● Integral reservoir over-pressurization protection

● Use compressed air as the power source, applicable to coal mine etc, with advantages of anti-explosion, safety no heat and long time working.

● High performance pneumatic reversing valve, safe and reliable, stable performance.

● Al-Ti alloy pump body, light weight, easy to carry.

● 4-70MPa adjustable pressure.

● Use 4-8 bar air pressure.

● lt can be customized as requested.

● The pressure can be released after pressing the button when the pump stops working.

● Steel frame can protect the pump body and makes it easy to carry.

● Aluminium explosion-proof handle, solid and reliable.

● Simple to operate, easy to use, and can be operated independently by a single person.

● Particularly used for tight clearance conditions that cannot be completely installed with an Allen wrench.

● Can lock the safety splint to ensure that the tool will not fall off.

● prevents the nut on the other side of the stud from rotating.

● Exd ll BT4 three phase asynchronous motor, applicable to explosion proof occasions.

● The electrical control system adopts Exd ll BT4 explosion proof magnetic starter, safe

● External pressure regulating valve, 7-70MPa adjustable pressure.

● 3 stage plunger pump, high efficiency, low pressure fluctuation.

● Equipped with tubular protective frame, easy to move.

● Use compressed air as the power source, applicable to coal mine etc, with advantages of anti-explosion,safety, no heat and long time working.

● High performance pneumatic reversing valve, safe and reliable, stable performance.

● Al-Ti alloy pump body, light weight, easy to carry.

● It can drive 2 hydraulic wrenches simultaneously or 4 if requested.

● 4-70MPa adjustable pressure.

● Use 4-8 bar air pressure.

● It can be customized as requested.

● The pressure can be released after pressing the button when the pump stops working.

● Steel frame can protect the pump body and makes it easy to carry.

● Aluminium explosion-proof handle, solid and reliable.

● Display/Output torque value, convenient and high efficiency.

● Measure and display the peak torque value.

● Complete data collection, multiple output formats.

● Access to view by bluetooth of mobile phone or PC.

● Can replace torque calibration equipment to test hydraulic tools.

● Torque accuracy +/-1%

● All-aluminum titanium alloy cover and the support plate, high strength, good toughness, light weight.

● Digital display integrated display, easy to adjust.

● High detection accuracy ±1.5%.

● One detector can replace the square inserts, suitable for a wide range of wrenches.

● The pivot point of the reaction arm can be adjusted 360°, and different types of wrenches can be stably supported.

● All aluminum alloy housing and support, light weight

● Split display, easy to move,observe, adjust convenient

● Suitable for testing screws of different specifications, suitable for wide range

● Slot-type wedge-shaped force-bearing surface, push-pull clamping way, easy to disassemble/install, reliable connection

● High-precision sensor, high detection accuracy, can up to±1%

● Digital display of force value, the reading is more intuitive

● Easy to carry, more suitable for on-site sampling equipment

● Max working pressure 200MPa.Applicable to bolt tensioner

● Adopt Simens controller and human interface, stable performance.

● One-touch operation,just need in put tensile force,easy operation

● Automatic pressure compensation, eliminate pressure loss caused by mechanical deformation,making tensioning more accurate

● Searchable operation records

● Automatic pressure relief function.

● The oil tank is updated into casting aluminium alloy.

● Pump is made of aircraft aluminium,smaller size and lighter weight.

● Max working pressure is 200MPa.

● High performance safety valve,stable pressure.

● High performance radiator can guarantee long time working.

● Air supply:6bar compressed air, max consumption is 600L/min

● Preset torque，output and repeat accuracy:±5% and ±3%

● Powerful and low noise, less than 80Dba under load

● Free connection of power handle and gear box, could be rotated 360°

● With manual 2-speed gearbox, high/low speed can be shifted freely

● Reverse pressure-bias motor provide the higher torque when removing or loosening bolts

● Supply scope: Air register, hose, quick coupling(air inlet connector of air register is excluded)

● Air supply: 6bar compressed air, max consumption is 600L/min

● Preset torque,output and repeat accuracy:±5% and ±3%

● Powerful and low noise, less than 80Dba under load

● More suitable for limited working space compared to the straight type

● With manual 2-speed gearbox,high/low speed can be shifted freely

● Equipped with brake system to protect the operator

● Supply scope: Air register, hose, quick coupling (air inlet connector of air register is excluded)

Single speed pneumatic torque wrench

● Air flow requirements: PSW-06/10/15, 6bar, 600L/min

● Air flow requirements: PSW-21~PSW-100, 7bar, 800L/min

● Preset torque, output & repeat accuracy: ±5% & ±3%

● Powerful and low noise, less than 80Dba

● Free connection of power handle and gear box, could be rotated 360°

● With single speed gearbox, light weight and small size, easily operated

● Suitable for continuous working with no-impact

● Supply with air register, hose, quick coupling

● Preset torque, stop working automatically

● Air supply:7bar compressed air, max consumption is 600L/min

● Adjust the torque via F.R.L unit, accuracy:±5%

● Powerful and low noise, less than 80Dba under load

● Free connection of power handle and gear box, could be rotated 360°

● With manual 2-speed gearbox, high/low speed can be shifted freely

● Aluminum alloy metal shell air motor & handle, more durability

● Intense planetary system design, better torque-weight ratio

● Excellent contentious working capacity

● Supply with F.R.L unit, air hose and connector.